Strip away caked-on trail sludge, oxidized grease, and stubborn water-resistant filter lubricants with the professional-grade Maxima Racing Oils Fabric & Foam Air Filter Cleaner. Formulated explicitly as a high-potency 15.5-ounce aerosol degreaser, this heavy-duty emulsion-type cleaner cuts through severe intake contamination without breaking a sweat. Its advanced chemical matrix is engineered to penetrate deep into complex foam pores and pleated fabric layers, lifting abrasive grit so it can be completely flushed away with a simple water rinse.
Why Riders Shop Mad Lads Moto
- Orders placed today ship same-day or next-day across the lower 48 states!
- We recommend combining this workshop spray with a premium Maxima FAB-1 Air Filter Oil Spray and a dedicated filter washing bucket to establish an absolute, factory-grade intake maintenance loop.
- Utilizes an advanced, surface-active compound that thoroughly dissolves heavy oil tackifiers while remaining completely non-corrosive to filter components.
- Formulated with a specialized rinse-off chemical logic that binds with water, allowing the dissolved oil slurry to wash away easily without leaving behind a slippery residue.
Confirmed Filter & Vehicle Compatibility
Part number 79920 features a specialized formulation designed to protect delicate internal component glues from dissolving or weakening. Meticulously cross-referenced against garage maintenance specs, this heavy-duty air filter cleaner is a verified direct fit for servicing the following powersports applications:
- Foam Air Filters: 100% chemically safe for all single-stage and dual-stage open-cell polyurethane foam structures. Cleans Twin Air, Uni Filter, Pro Filter, and DT1 elements.
- Fabric Air Filters: Thoroughly degreases pleated cotton and fabric mesh filter configurations, including high-performance K&N elements.
- Motocross & Off-Road Dirt Bikes: Safely strips caked track dust and fuel fog from intake elements across Honda CRF, Yamaha YZ/YZF, Kawasaki KX/KXF, KTM, and Husqvarna models.
- Utility ATVs & Sport Quads: Flushes out abrasive sand, silt, and trail grit from low-hanging filter boxes on machines like the Polaris Sportsman, Yamaha Raptor, YFZ450R, and TRX450R.
- Side-by-Sides & UTVs: Excellent bulk-service cleaner for high-volume intake elements used in rugged desert and trail environments.
CRITICAL FILTER RINSING, DRYING, AND RE-OILING CORE LOGIC:
**Foam Glued-Seam Protection Warning:** When cleaning dual-stage foam filters, never violently twist, wring, or squeeze the filter core to dry it out. Wringing the foam puts intense structural stress on the manufacturing glue tracks and can easily tear the seams. Instead, press the filter flat between your palms to extract moisture.
**Paint and Graphics Overspray Caution:** Avoid spraying or allowing drift overspray to rest on custom bike graphics or painted fairings. Wipe away any accidental overspray immediately with a fresh microfiber towel to preserve your clean exterior finish.
**Rinse & Re-Lube Core Logic:** Because this formula completely breaks down all oils, running a dry or cleanly stripped filter will allow engine-killing dust to pass directly into your cylinder. **Always rinse the filter thoroughly with fresh water, let it air dry completely, and immediately apply a fresh coat of Maxima FAB-1 or FFT filter oil** prior to street or track riding.
Technical Specifications
| Attribute |
Specification |
| Cleaning Compound Class |
Heavy-Duty Emulsion-Type Air Filter Degreaser |
| Container Net Volume |
15.5 Ounces (439 Grams) Full-Size Workshop Aerosol Can |
| Filter Material Compatibility |
100% Safe for All Polyurethane Open-Cell Foams and Pleated Cotton/Fabric |
| Dispensing Delivery Mechanism |
Aerosol Mist Spray with High-Volume Delivery Valve |
| Rinse Requirement |
Water-Soluble Formula (Requires thorough fresh water flush) |
| Residue Metrics |
Leaves absolute zero oily film to interfere with fresh filter treatment tackifiers |
| Primary Function Metrics |
Dissolves heavy air filter oils, grease, dust crust, sand mud, and fine silt |
| Manufacturer Part Number |
79920 (UPC: 851211001958) |
US Dollars
