KFI UTV Straight Blade 66 in.

66 in. steel straight blade for UTVs

The KFI Pro-S 66 in. straight blade is an 11-gauge steel plow blade that pushes snow straight ahead or angles it up to 25 degrees to either side. It is made in the USA and finished in metallic silver powder coat over a bead-blasted surface.

• Steel build: 11-gauge steel face with 3/16 in. Grade 50 ribbing for a strong bolt-up to the swivel.
• Wear bar: 2-sided 3/16 x 3 in. Grade 50 steel wear bar on Grade 8 bolts; flip it to use the second edge.
• Adjustable skids: Heavy-duty 3 in. diameter Grade 50 skids on bolt-on brackets set the blade height.
• Snow flap: Includes a 7 in. 2-ply rubber top flap.

What you need for a complete plow

A plow is four parts that work together, each sold separately. This page covers the blade; you also need the others before you can plow.

1. Blade: This item.
2. Push tube: KFI Pro 2.0 UTV Push Tube (106300). It replaced KFI's discontinued round 105635 UTV tube. Running a Cycle Country UTV blade? Use the KFI CC Pro 2.0 UTV Push Tube (106310).
3. Plow mount: The KFI UTV plow mount made for your machine's year, make and model. Set your machine in the vehicle selector, then browse plow mounts and push tubes. Some mounts also call for a specific winch mount or kit; check the mount's page.
4. Lift: A winch (see winches) on a winch mount for your machine (see winch mounts). A plow is too heavy to lift by hand while you drive. KFI's Pro 2.0 manual lists a winch for lifting the system. Low winch? The KFI UTV Plow Lever Lift (106045) improves the cable angle. Optional: a KFI Quick Plow Pulley, steel cable (106680) or KFI Quick Plow Pulley, synthetic (106745).

Specifications