KFI Manual ATV Plow Lift

Lift a KFI ATV plow without a winch

The KFI manual lift raises a KFI ATV plow by hand lever, getting at least 5-1/2 in. of lift with around 25 lb of effort. It stays with the push tube when you take the plow off.

• Lift: At least 5-1/2 in. of lift with about 25 lb of effort.
• Blades: For KFI blades up to 60 in.
• Push tubes: Works with KFI ATV push tubes 105000 and 105760.
• Stays with the plow: Comes off with the plow tubes when you are done plowing.

What you need for a complete plow

A plow is four parts that work together, each sold separately. This page covers the lift; you also need the others before you can plow.

1. Blade: A KFI ATV blade: KFI 48 in. Pro-S, 54 in. Pro-S or 60 in. Pro-S steel, the 50 in. Light Flex, or the 60 in. Pro-Poly.
2. Push tube: KFI ATV Plow Base Push Tube (105000). Running a Cycle Country ATV blade? Use the KFI Conversion Push Tube - ATV (105760) instead.
3. Plow mount: The KFI ATV plow mount made for your machine's year, make and model. Set your machine in the vehicle selector, then browse plow mounts and push tubes. Some mounts also call for a specific winch mount or kit; check the mount's page.
4. Lift: This item.

Good to know

• KFI notes it does not work with plow mount 105715.
• Built for KFI ATV push tubes. KFI's UTV Pro 2.0 system lifts with a winch.

Specifications