KFI 21+ Yamaha RMAX/ 4 1000 UTV Plow Mount

Wolverine RMAX UTV plow mount

This KFI front-lower plow mount bolts to the Wolverine RMAX and lets the KFI Pro 2.0 UTV push tube pin on and off with two standard 5/8 in. hitch pins. It is made in the USA, and all mounting hardware is included.

• Push tube: Fits the KFI Pro 2.0 UTV push tube (106300); KFI also lists the discontinued round 105635 tube.
• Pin on, pin off: Front-lower mount with two standard 5/8 in. hitch pins (pins come with the push tube).
• Build: 1/4" thick grade 50 steel for durability and strength, 1/4 in. Grade 50 steel mounting tabs, bead blasted then powder coated black.
• Install: All mounting hardware and complete instructions included.

What you need for a complete plow

A plow is four parts that work together, each sold separately. This page covers the plow mount; you also need the others before you can plow.

1. Blade: A KFI UTV blade: KFI 66 in. Pro-S or 72 in. Pro-S steel, or the 60 in. Pro-Poly, 66 in. Pro-Poly or 72 in. Pro-Poly.
2. Push tube: KFI Pro 2.0 UTV Push Tube (106300). For a V-plow, KFI's Pro-V tube kits (manual 106180-MP or actuator 106180-AP) also fit this mount.
3. Plow mount: This item.
4. Lift: A winch (see winches) on a winch mount for your UTV. Low winch or poor cable angle? Add the KFI UTV Plow Lever Lift (106045).

Vehicle fit

From KFI's application chart. A letter in the Notes column means your vehicle needs something extra; see the notes key below the table.

Notes key

• J: Requires KFI 2" Leveling Kit #106322 (New Tubes 106300) or #105700 (Old Tubes 105635)

Good to know

• If your UTV has been modified (larger tires, lift kit, forward A-arms or tracks), KFI notes you may also need a KFI leveling kit for proper fit.

Specifications