Antigravity Batteries
Antigravity Micro-Start Replacement Wall Charger Accessory AU Power Plug (MPN: AG-MSA-17-AU)
Antigravity Micro-Start Replacement Wall Charger Accessory AU Power Plug (MPN: AG-MSA-17-AU)
Keep your emergency jump starter fully replenished and ready for international transit or regional deployment. The Antigravity Micro-Start Replacement Wall Charger Accessory AU Power Plug is a vital power delivery component developed to balance structural rigidity with uncompromised electrical throughput [MPN: AG-MSA-17-AU]. Engineered as a direct factory-spec replacement or a dedicated travel supply, this high-quality wall block houses advanced internal transformer circuits that smoothly down-step AC voltage into a steady DC stream. It plugs directly into standard mains outlets to eliminate the stress of dead power banks, ensuring your handheld emergency units recover a 100% state of charge rapidly and safely. By utilizing clean copper internal wiring pipelines, it maximizes thermal dissipation and shields your premium lithium jump pack from erratic grid fluctuations during crucial overnight refresh cycles.
Universal Charging Component Parameters
This compact multi-region electrical accessory operates across worldwide power grids, accepting any variable input from 100V to 240VAC at standard 50-60Hz frequencies. It features brand-specific loop tolerances and an integrated 5-foot (1.52 m) durable transmission cord ending in a barrel tip designed to seat snugly into matching 15V input ports. The localized chassis profile integrates a robust Type I insulated pin configuration, instantly matching the standard electrical socket formats of Australia and New Zealand to mitigate trackside repair safety constraints while abroad. Note that this specific charging cable is strictly incompatible with current-generation Micro-Start XP-3 variants or newer standard USB-only jump packs, which lack a physical 15V barrel port and rely solely on Type-C USB charging pipelines.
Antigravity Micro-Start Host Power Bank Compatibility
- Antigravity Micro-Start XP-10 Heavy Duty Jump Starter (All 15V Input Layouts) — 2014 to 2027
- Antigravity Micro-Start XP-10-HD Heavy Duty Lithium Power Supply — 2020 to 2027
- Antigravity Micro-Start XP-1 (Gen 1 and 15V Input Frameworks Only) — 2013 to 2019
- Antigravity Micro-Start XP-3 (Older 15V Barrel Port Designs Only) — 2013 to 2016
Other Applications
This localized Type I power adapter functions as a dedicated standalone wall charger optimized for international adventure travel, long-range rally support, and regional emergency preparation kits. It allows riders, logistics crews, and overlanders to confidently charge their compatible lithium jump starters using standard residential, commercial, or garage workshop outlets across Australia, New Zealand, Papua New Guinea, Argentina, and China without relying on bulky, high-resistance adapter plugs.
CRITICAL INSTALLATION AND SAFETY NOTES: Always insert the 15V DC barrel tip firmly and completely into the host jump starter's charging socket prior to plugging the heavy-duty Type I mains prongs into a live wall receptacle to prevent erratic terminal arcing. Avoid routing the flexible 5-foot transformer cable tightly over sharp metal workbench corners, and never operate the charger inside damp environments, exposed paddock bays, or enclosed vehicle spaces where heat retention can exceed 140 degrees Fahrenheit or 60 degrees Celsius. Check that your specific power bank features a physical 15V circular input jack, and always disconnect the module from the wall outlet once the host device's onboard digital battery gauge indicates a full charge configuration.
Technical Specifications
| Field | Value |
| Brand | Antigravity Batteries |
| Model Series | Micro-Start Charging Accessories Series |
| Part Number | AG-MSA-17-AU |
| Mains Wall Plug Type | Type I (Standard 2-Pin Insulated Configuration) |
| Grid Input Voltage Range | 100V - 240VAC (Worldwide Worldwide Compatibility) |
| Input Grid Frequency | 50 - 60 Hz Universal |
| Charging Output Rating | 15V DC Output Pipeline |
| Output Connector Type | Coaxial DC Barrel Plug Tip |
| Harness Length Profile | 5 Feet — 1.52 m Continuous Cable |
| Integrated Safety Circuitry | Over-Voltage (OVP), Over-Current (OCP), Short Circuit (SCP), Over-Temperature (OTP) |
| Primary Geographical Target | Australia, New Zealand, Argentina, China, Papua New Guinea |
Why Riders Shop Mad Lads Moto
- We ensure completely reliable fitment data by cross-referencing factory parts microfiche. Your safety on the road or trail relies on getting the exact right hardware without any guessing.
- Our warehouse processes orders rapidly to minimize your machine's downtime. We ship your critical replacement parts out quickly so you can return to riding.
- Every rider receives active support from genuine powersports specialists. You can contact the expert team at Mad Lads Moto to get answers to technical plumbing, electrical, and hardware inquiries.
- We stand behind our catalog with simple, hassle-free returns. Shopping with us is entirely straightforward and secure from checkout to delivery.
Checking Fitment
Not every product runs through our fitment finder, and we would rather you confirm exact fitment than rely on a partial filter. Match the specifications against your machine or the part you are replacing, or contact us and we will confirm it for you.
Ask a Parts Specialist →| Brand | Antigravity Batteries |
|---|---|
| SKU: | AG-MSA-17-AU |
| MPN | AG-MSA-17-AU |
| UPC: | 711811703782 |
| Condition: | New |
| air_freight_prohibited | false |
| not_carb_approved | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | powersports |
| epa | N/A |
| carb_acknowledgement_required | false |
| regular_stock | t |
| units_per_sku | 1 |
This product hasn't received any reviews yet. Be the first to review this product!
Write a ReviewNot Sure What Fits? Ask a Rider.
Tell us what you ride and what you're working on. We'll help you find the right part.
US Dollars