Your saved machines. Pick one to shop every part with verified fitment for it.
No machines saved yet. Add one with the year / make / model finder.
The Antigravity Batteries SAE to Male Cig Lighter Plug Adapter [MPN: AG-SAE-CG-M] delivers a seamless, high-utility 12V power link engineered to route auxiliary power directly from your vehicle's standard SAE battery tender lead out to a conventional female cigarette lighter port accessory. This heavy-duty power accessory solves the common off-road and adventure touring challenge of trying to charge personal devices, GPS units, tire inflators, or camping gear directly from a motorcycle or powersports battery without splicing custom wiring blocks. Utilizing a standard quick-disconnect SAE plug on one end and a durable male cigarette lighter port connector on the other, this heavy-gauge copper cable maximizes current conductivity while protecting sensitive electronic hardware from loose contact drops or high-resistance thermal build-up during long hours of outdoor exploration. [MPN: AG-SAE-CG-M]
This SAE to male cigarette socket cord functions as a standard universal adapter across any motorcycle, ATV, UTV, watercraft, snowmobile, or automotive chassis fitted with a pre-wired 12V battery harness. Because inline battery tender ports are wired with direct, un-switched hot lines branching from the positive terminal posts, always verify that your connected electronic devices are fully disconnected when the vehicle is parked to avoid triggering rapid parasitic battery drain or structural voltage drop conditions.
The Antigravity Batteries quick-disconnect SAE adapter provides a reliable power expansion path across all platforms utilizing standardized battery charging infrastructure:
Beyond traditional powersports machines and off-road dirt bikes, this premium 12V charging link serves as an excellent portable upgrade baseline for custom solar charging arrays, marine micro-panels, backup emergency battery boxes, and custom overlanding vehicle setups utilizing standard SAE connectivity. Ensure that the total current draw of your auxiliary hardware remains securely inside the maximum amperage safety thresholds of the vehicle's pre-installed inline fuse block to prevent melting wires or popping circuit lines during active accessory use.
CRITICAL INSTALLATION AND SAFETY NOTES: This is a high-performance electrical adaptation component and must only be introduced to 12-volt DC power grid loops matching its exact design parameters. Never attempt to force this low-voltage adapter into non-standard 24-volt commercial truck networks or custom AC inverter layouts; over-voltaging the circuit fundamentally overloads the core wiring, melts the insulation layers, and triggers immediate electrical fire or accessory destruction scenarios. Always verify full mechanical engagement and clear debris inside the male cigarette terminal pins before applying power. Ensure that your main chassis SAE adapter line features a high-quality, weather-tight protective cap to seal out mud, trail sand, and high-pressure wash water when riding uncoupled to prevent cross-pole shorts or terminal greening. Electronic alignment of wire polarity must be checked prior to operations; because SAE lines can reverse polarity depending on the source harness construction, double-check that your positive (+) pin aligns safely with your target socket to avoid high-velocity circuit damage or device terminal rupture.
| Brand | Antigravity Batteries |
| Product Line / Series | Powersports 12V Cable Adapter Series |
| Input Connector Style | Standard 2-Pin Quick-Disconnect SAE Plug |
| Output Connector Style | Standard Male Cigarette Lighter Socket Plug |
| Operational Voltage Matrix | 12V DC Low-Voltage Systems |
| Wire Gauge Specification | Heavy-Duty Multi-Strand Copper Wiring Baseline |
| Amperage Safety Threshold | Optimized for standard accessory draws up to 10A Max |
| Insulation Jacket Properties | Weatherproof Thermoplastic / Oil and UV Resistant Skin |
| Color / Aesthetic Style | Solid Tactical Black Finish |
| Drivetrain Application | Motorcycles, ATVs, UTVs, Snowmobiles, Custom Overlanding Builds |
| Quantity Sold | Individually (One complete heavy-duty adapter cable loop) |
| Manufacturer Part Number | AG-SAE-CG-M |
Not every product runs through our fitment finder, and we would rather you confirm exact fitment than rely on a partial filter. Match the specifications against your machine or the part you are replacing, or contact us and we will confirm it for you.
Ask a Parts Specialist →| Brand | Antigravity Batteries |
|---|---|
| SKU: | AG-SAE-CG-M |
| MPN | AG-SAE-CG-M |
| Condition: | New |
| air_freight_prohibited | false |
| not_carb_approved | false |
| carb_acknowledgement_required | false |
| ltl_freight_required | false |
| prop_65 | Unknown |
| part_type | powersports |
| epa | N/A |
| units_per_sku | 1 |
| regular_stock | t |
This product hasn't received any reviews yet. Be the first to review this product!
Write a ReviewTell us what you ride and what you're working on. We'll help you find the right part.
US Dollars
